Home / SSCE / Waec Updates / Real Waec AUTO ELECTRIC Work Syllabus And Hot Topic You Should Study

Real Waec AUTO ELECTRIC Work Syllabus And Hot Topic You Should Study

Waec AUTO ELECTRIC Work Syllabus

You’re here: Real Waec AUTO ELECTRIC Work Syllabus And Hot Topics You Should Study. Are you writing Waec AUTO ELECTRIC Work 2021? do you want to pass waec AUTO ELECTRIC Work 2021?

Are you writing AUTO ELECTRIC Work in Waec 2021? are you looking for Real Waec AUTO ELECTRIC Work Syllabus And Hot Topics You Should Study?

Well, if that’s why you are here then I must tell you a very big welcome to 9jajoinlearn.

This is the official 2021waec GCE syllabus for AUTO ELECTRIC Work. I will make it available for download later. You may click here for how to pass waec GCE 2021/2022 or click here for a Waec GCE syllabus for all subjects.


This examination syllabus has been evolved from the Senior Secondary School Trade Curriculum. The examination syllabus does not replace the curriculum.

The syllabus has been arranged to subsume six themes: battery, starting, ignition, charging, lighting and auxiliary systems.


The objective of the syllabus is to test candidates’ knowledge, skills and attitude in the field of Auto Electrical Works. Specifically, candidates are to:

  • understand the concepts in auto electrical works;
  • use tools and equipment to carry out maintenance and repair on motor vehicles;
  • understand the safety practices and observe them in the work environment.



There will be three papers, Papers 1, 2 and 3, all of which are to be taken. Papers 1 and 2 shall be a composite paper to be taken at one sitting.

PAPER 1:        will consist of forty multiple-choice objective questions all of which are to be answered in 45 minutes for 40 marks.

PAPER 2:        will consist of six short-structured questions. Candidates will be required  to answer any four in 1 hour for 60 marks.

PAPER 3:        will be a practical test of 2 hours duration. It will consist of three

skill-based questions out of which candidates will answer two for

90 marks.

A list of materials for the test shall be made available to schools

not less than two weeks before the paper is taken for materials

procurement and relevant preparations.

Alternative to Practical Test:

Alternatively, in the event that materials for the actual practical test cannot be acquired, the Council may consider testing theoretically, candidates’ level of acquisition of the practical skills prescribed in the syllabus. For this alternative test, there will be two compulsory essay questions to be answered in 2 hours for 100 marks.

Industrial Attachment

This should be done by the candidates during the long vacation between their SS II and SS III course. It will be supervised and assessed by their subject teachers. It will carry 10 marks.







1.1  Concept of battery



1.2  Uses of battery



1.3  Types, Constructional details and ratings


1.4  Charging







1.5 Testing and Maintenance










2.1 Purpose and components of starting system



2.2 Circuit diagram





2.3 Types of starter motor



2.4 Repair of starter motors











3.1 Purpose and components of ignition system





3.2 Circuit diagram




3.3 Construction and operation of ignition coil




3.4 Types of Ignition System



3.5 Timing



3.6 Faults and repairs












4.1 Purpose and components of charging system



4.2 Alternator




4.3 Circuit diagram






4.4 Faults and repairs












5.1 Purpose and classification of lighting in a motor



5.2 Head lamps




5.3 Circuit diagram



5.4 Maintenance and repairs








6.1 Concept and components of auxiliary system




6.2 Constructional details and operation of

auxiliary system component




6.3 Maintenance and repairs of auxiliary




Definition, distinction between motor vehicle battery and other batteries


Treatment should include vehicle battery assembly and as power source in soldering


Lead-acid and Nickel-alkaline types


Safety rules

Electrolyte preparation

Battery cleaning and connection

Charging mode

State of charge

Treatment should include electrolyte testing


Specific gravity test of electrolyte

Cell voltage and polarity tests

Tools and equipment

Treatment should include electrolyte topping up, hydrometer reading and interpretation, over-charging symptoms and idle-battery safe-keeping hint




Treatment should include battery, flywheel, starter

motor, switch and solenoid


Drawing and reading of circuit diagram

Treatment should include the location of the

components and their sequential arrangement in a



Axial and Inertia.

Treatment should include pinion engagements


Dismantling and assembling

Bushing and brush replacement

Commutator soldering/repair

Trouble shooting and rectification


Treatment should include armature servicing,

diagnosis and repairs/restoration





Ignition system assembly

Treatment should include circuit cables, ignition

switch, battery, coil, distributor, capacitor, high

tension leads and sparking plugs


Drawing and reading of circuit diagram

Treatment should include line diagram and

conventional symbols


Circuit diagram

Treatment should include the internal construction

of the coil


Conventional contact breaker and electronic

ignition systems


Concept and timing faults such as retarded ignition and over-advanced ignition.


Hard starting


Back firing etc.

Emphasize the use of multimeter, scanner, test

lamps etc.




Charging system assembly as a sub-system in a

motor vehicle

Treatment should include switch, battery, cables,

alternators, voltage regulators.


Constructional details

Conversion of a.c. to d.c.(rectification)

Function of each part of an alternator


Drawing and reading of circuit diagram

Treatment should include graphical and pictorial

representation, need for diagrammatic

representation and how to remove and fix the

charging system units


Brush and Bearing replacement

Diode testing, repair and replacement

Treatment should include bearing seizure, charging

failure etc.





Obligatory and non-obligatory lights





Setting of head lamps


Classification, drawing and reading of circuit



Trouble shooting

Treatment should include tools, equipment and

procedures for repairing faults such as broken

headlamp lens, bulb failure, non-aligned

headlamps, open and short circuits etc.




Definition, uses and units

Treatment should include needs for auxiliary



Treatment should include water temperature gauge,

oil pressure gauge, fuel gauge, horn relay, wiper

switch, screen watcher pump, indicator and door




Treatment should include tools and equipment and

Procedures for repairs of faults such as the failure

of horn, screen wiper, oil pressure gauge, fuel

gauge etc.




  • Motor batteries
  • Battery head moulder set
  • A complete tool box
  • Polythene hand gloves sets
  • Ammeter, voltmeter, multimeter
  • High rate discharge tester
  • Spanners, hand drilling machine
  • Vice
  • Bench/Table
  • Wire brush, bearing extractor, pulley extractor
  • Feeler gauge, soldering iron and lead
  • Emery cloth, wooden file, aprons
  • Jumper cable, magnetic pick-up
  • Googles, plastic trays
  • Hydrometer
  • Tester (Screw driver type)
  • Battery charger, testing lamp, cable stripper, insulation tape

Feel free to ask your questions and don’t fail to share this article via your favorite share buttons below.

About admin

Check Also

Can A Held Waec Result Be Released? – (Waec Series Pt34)

You’re currently reading Can A Held Waec Result Be Released?. So many students online search …

Leave a Reply

Your email address will not be published. Required fields are marked *